VIOLINS & VIOLAS

Premium Tonewoods & Expert Craftsmanship

Introducing the Lumière & Résonance Series

Stunning to see. Striking in sound.

Every player who has ever stood in a shop, instrument in hand, has felt some version of the same pull. The sound that stops you mid-breath. The instrument you can't stop looking at. Rarely both — and rarely from a shop small enough to give each one the attention it deserves.

V. Richelieu™ is not a factory line. We are a boutique violin shop, and every instrument that leaves our hands is one of a kind — no two alike in grain, in voice, or in the story they go on to live with the player who chooses them.

Our goal was simple to state, yet incredibly difficult to build: give serious players and advancing students access to instruments defined by a single, uncompromising pursuit — extraordinary sound and beauty, held in equal regard — without asking them to wait a decade or spend beyond what the moment calls for. Every choice in this series, from the sustainably sourced wood we select to the price we set, exists to serve that goal.

Design & Sound

Two paths. One obsession.

Every instrument at V. Richelieu™ begins with the same question: what is this instrument for?

A great instrument moves a room with its voice, and moves a person the moment they see it. We believe both deserve full, undivided pursuit — never one at the expense of the other.

So we built two distinct lines, each dedicated to a single idea, taken to its fullest expression.

  • Résonance is built for sound.

  • Lumière is built for light.

Together, they represent the two reasons a player falls in love with an instrument in the first place — and in our workshop, neither ever takes a back seat to the other.

Lumière

Where the wood speaks first.

Before a single note is played, Lumière has already made its impression.

Every Lumière instrument begins with wood most makers will never touch — flamed maple so rare it accounts for less than one percent of what's responsibly harvested, selected in the earliest hours of the process, from sustainably managed forests, when the tree is little more than a promise. The flame pattern, the depth of grain, the way light will eventually move across the surface — all of this is decided before the first cut is made. It cannot be added later. It can only be found.

Because we source this way, no two boards are identical — which means no two Lumière instruments ever are, either. Each one carries a grain pattern that belongs to it alone, making the instrument a genuinely personal match for the player who plays it.

The result is a violin or viola finished to catch and return light the way a French evening does — warm, layered, alive at the edges. It is chosen by players and collectors who understand that an instrument is also an heirloom, an object held on stage, in photographs, and in memory — and, sound for sound, it holds its own beside anything in the Résonance line.

Design Details

  • One-in-a-hundred maple. Curly, flamed maple selected for visual character at the sourcing stage — before construction begins — from forests managed for the long term.

  • Hand-finished varnish. Built in painstakingly slow layers to enhance depth and reflectivity.

  • A unique fingerprint. A grain pattern entirely unique to each instrument; no two are alike, and no two ever will be.

  • Full tonal integrity. Lumière is never chosen at the expense of sound, only in addition to it.

This is the instrument you choose when the instrument itself is part of the story.

Résonance

The sound that doesn't stop.

Some instruments play a note. Others let a note live.

The Résonance Series exists for one purpose: to fill a room and hold it. Every plate is graduated by hand, tapped and re-tapped, shaved by fractions of a millimeter until the wood resonates exactly where it should. This is not a fast process. It cannot be. Sound this complete is earned one shaving at a time — and because each instrument is voiced individually by hand, no two Résonance instruments ever sound quite the same.

Professional players choose Résonance because it answers back — in a concert hall, in a quartet, in a recording booth where every overtone matters. Advancing students choose it because it grows with them, revealing more of itself the better they play. An instrument that rewards effort is an instrument that teaches — and, in time, an instrument that becomes theirs in a way few possessions do.

Acoustic Innovation

  • A voice built for projection. Clear from the front row, warm from the back.

  • Hand-graduated plates. Tuned by ear across hundreds of micro-adjustments.

  • Responsibly sourced for vibration. Tonewood selected from sustainably managed forests specifically for density and vibration transfer, not appearance alone.

  • Performance-calibrated setup. Tuned for the demands of performance: instantaneous bow response, immense sustain, and absolute evenness across all four strings.

This is the instrument you reach for when the room needs to hear you.

Close-up of a wooden violin top, showing wood grain and finish.

Craftsmanship

Uncompromised value. Traditional hands.

A boutique, not a production line.

Résonance and Lumière sit at the top of what we make. These are instruments priced elsewhere in the $10,000–$20,000 range, offered here starting at $7995, because we believe exceptional craftsmanship should be judged on the instrument, not the markup.

Every Résonance and Lumière violin and viola is built in our workshop — by hand, in small numbers, by luthiers trained in traditional French methods — using sustainably sourced tonewoods selected specifically for the edition they'll become. Nothing here is mass-produced, relabeled, or finished on a shortcut. As a boutique shop, we build to the instrument, not to a quota — which is why no two ever come out quite the same, and why each one is suited to find its own player. What you're holding is the result of a single-minded decision, made early and followed through to the last coat of varnish.

The Heart of Innovation

Our Luthiers' Passion. Your Unique Sound.

Our luthiers are a creative bunch and love to innovate. Each year they apply their creative juices to the creation of new designs that we offer as special editions. Whether they feature a new model or new materials, the attention to detail, quality, and performance never falters.

Close-up of a person working on a guitar, using a cutting tool to carve or outline a design on the wood surface while wearing a blue long-sleeve shirt.
Person tracing a bunny-shaped cutout on wood with a black marker.
Hands working on a woodworking project with clamps, wood pieces, and a sanding or polishing tool on a workbench.

Expanding the Sound Palette

Sourcing Tonewoods from the American Landscape

Map of the United States with five marked locations in Vermont, New Hampshire, New York, Michigan, and Alaska.

A Symphony of Surprise

Discovering the Unique Voices of American Woods

Close-up of a woodworking process with a guitar body in the making, hand and tools visible.

We enjoy building a diversity of models using a range of woods that give players a broad choice of sound and color.

Collection of eight violins with various wood finishes labeled Guarneri Violin, Da Salo Viola, Erdesz Viola, NE Red Maple, Sycamore, Coquille Maple, and Myrtle.

While developing new V. Richelieu models, we explored alternative tonewood sources. New England has exported spruce, maple and other woods for hundreds of years.  The United States is currently one of the worlds largest timber suppliers.  In Vermont where we work, neighbors, carpenters and a broader network of wood sources regularly stop by or contact us with a variety of North American spruce and maple species.  We took advantage of the opportunity to compare these woods in violas with the standard European tonewoods we felt familiar with.  Like violin makers in the 17th and 18th century, we expanded our wood selection and sound.

The selection of woods and sound surprised us.  Red spruce from Maine feels and sounds different from red spruce from the Adirondaks.  Sitka spruce that had been used as “soak logs” in rivers to hold salmon nets worked (and smelled) differently than new Sitka spruce.  We compared red maple from the Catskills, red maple from Maine; big leaf maple from the Coquille reservation in Oregon, big leaf maple from parts of Washington State.  We explored further with Myrtle, Sycamore and Cherry.  We built over 300 instruments, collecting sound and density data for the different woods.  Initial data collection suggests north American forests contain a diverse variety of potential tonewoods that would benefit the sound pallet.

Find the Instrument that Resonates with You

Three different violin backs shown from the backside, varying in wood grain and finish.